Next: Closed Orbit Correction
Up: Tables
Previous: Compute Geometric Layout
  Contents
  Index
Orbit Threader
When the closed orbit search in a MICADO or
TWISS command fails due to machine imperfections,
it may be possible to thread the orbit through the machine using the command
THREADBPM,LINE=name,BEAM=name,RANGE=range,TOL=real,LISTC=logical,LISTM=logical;
This command has the attributes:
- LINE
-
The label of a previously defined beam line (no default).
- BEAM
-
The label of a previously defined beam (default UNNAMED_BEAM).
This is used to define the type and reference momentum for the
particles to be sent through the line.
- RANGE
-
If this attribute is given, the table is restricted to the range given.
- TOL
-
The orbit is observed at all beam position monitors (BPM).
When the orbit deviation exceeds TOL,
a correction is attempted.
MAD backtracks to find another monitor and two correctors and tunes the
latter so as to adjust the readings of the two monitors to zero.
- LISTC
-
If true, list the corrector settings after correction.
- LISTM
-
If true, list the monitor readings after correction.
Next: Closed Orbit Correction
Up: Tables
Previous: Compute Geometric Layout
  Contents
  Index
MAD User Guide, http://wwwslap.cern.ch/mad/