Each trigger delivered by the CTTM is sent in output through 8 LEMO
bipolar connectors, placed on the CTTM back side, providing a LVDS signal.
Six of them deliver a L0 trigger, one of them is for L1 and the last
one is a spare.
Each connector is linked to the CTP by a Draka 2 wire cable.
Trigger Description in 2009 cosmic run:
0OCP: This trigger selects events where the number of fired hits N
ON is larger than N
thr.
The trigger is issued when N
ON > N
thr. N
thr can be changed by setting he text file /SOFT/TRG/CTTM/set_mbt.txt;
this number is also reported in the base panel CTTM.
0OB3: This trigger selects events where there is a fired hit on top of TOF detector and there is a corresponding hit in a window of 7/3 Supermodules
This picture explains better the topology:
0OIT: This trigger selects....
0OBE:This trigger is a subset of 0OB3 with only the sectors with EMCAL installed as top triggering hits
Trigger Description in 2008 cosmic run:
CH1: This trigger counts the number of fired hits N
ON, a number between 0 and 1728.
A trigger is issued when N
ON > N
thr, where N
thr can be changed just setting a
proper VME register.
CH2: This trigger selects the track useful for the TRD analysis. According to the TRD group
request a trigger is issued if the following condition is satisfied:
( (SM0_A && SM10_A) || (SM8_A && SM16_A) || (SM1_A && SM9_A) || (SM7_A && SM17_A) || (SM5_A && SM14_A) ) ) ||
( (SM0_C && SM10_C) || (SM8_C && SM16_C) || (SM1_C && SM9_C) || (SM7_C && SM17_C) || (SM5_C && SM14)_C ) )
Since Sept. 24, 2008, SM 5 and 14 were added in coincidence:
|| (SM5_A && SM14_A) || (SM5_C && SM14_C).
CH3: This channel does not deliver any trigger, since it is broken on the CTTM
CH4: This channel selects the "back to back" cosmic tracks. It delivers a signal the following condition is satisfied:
( (SM0_A && SM9_A) || (SM1_A && SM10_A) || (SM7_A && SM16_A) || (SM8_A && SM17_A) ) ||
( (SM0_C && SM9_C) || (SM1_C && SM10_C) || (SM7_C && SM16_C) || (SM8_C && SM17_C) )
CH5: This trigger selects the track useful for the HMPID analysis. According to the HMPID group
requests, a trigger is issued if the following condition is satisfied:
( (SM0_A && SM16_A) || (SM1_A && SM10_A) || (SM1_A && SM16_A) ) ) ||
( (SM0_C && SM16_C) || (SM1_C && SM10_C) || (SM1_C && SM16_C) ) )
CH6: This channel selects the vertical cosmic tracks. It delivers a signal the following condition is satisfied:
( (SM0_A && SM17_A) || (SM1_A && SM16_A) || (SM7_A && SM10_A) || (SM8_A && SM9_A) ) ||
( (SM0_C && SM17_C) || (SM1_C && SM16_C) || (SM7_C && SM10_C) || (SM8_C && SM9_C) )
CH7: Reserved for L1 trigger;
CH8: Spare channel: not connected to the CTP at the moment
--
EugenioScapparone - 16 Sep 2008