Details

Date	19/08/2020
Location	University of Bristol lab
People	Stoyan Trilov

Test description

Test firmware+software for DUNE DAQ v2.8.0 release. Tags used for the software and firmware are listed below.

timing - v5.5.0
timinglibs - v1.2.0
timing-board-firmware - relval/v6.0.0/b3

The hardware and the corresponding fibre connections used for the tests are listed below.

fanout <-> FMC (0x49162b675ea)
TLU <-> FMC (0xd880395da48e)
TLU <-> Fanout <-> FMC (0x49162b675ea)

timing

Master+Endpoint commands @ 62.5 MHz

The following master/endpoint commands executed successfully with the listed bitfile combinations.

pdtbutler io ${MST} reset ${MST_RST_OPT}
pdtbutler mst ${MST} synctime
pdtbutler mst ${MST} part 0 configure

pdtbutler io ${EPT} reset
pdtbutler ept ${EPT} 0 enable -a 2

pdtbutler mst ${MST} align apply-delay 2 0 0 --force

pdtbutler mst ${MST} part 0 status
pdtbutler ept ${EPT} 0 status

Fanout <-> FMC

MST=PROD_FANOUT_0
MST_RST_OPT = --fanout-mode 1
EPT=EPT_1

N.B. EPT1 UID: 0x49162b675ea

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/fanout_0_pc059_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-8_210818_1746.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/endpoint_pc053d_fmc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-11_210818_1736.tgz

MST=TERTIARY
MST_RST_OPT = ""
EPT=EPT_1

N.B. TERTIARY IP=192.168.200.65)
N.B. EPT1 UID: 0x49162b675ea

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/ouroboros_pc059_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-3_210818_1745.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/endpoint_pc053d_fmc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-11_210818_1736.tgz

TLU <-> FMC

MST=PROD_MASTER
MST_RST_OPT = ""
EPT=EPT_0

N.B. EPT0 UID: 0xd880395da48e

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/overlord_tlu_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-4_210818_1746.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/endpoint_pc053d_fmc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-11_210818_1736.tgz

MST=BOREAS_TLU
MST_RST_OPT = ""
EPT=EPT_0

N.B. EPT0 UID: 0xd880395da48e

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/boreas_tlu_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-14_210818_1744.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/endpoint_pc053d_fmc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-11_210818_1736.tgz

Master+Fanout+Endpoint commands @ 62.5 MHz

The following master/endpoint commands executed successfully with the listed bitfile combinations.

pdtbutler io ${MST} reset
pdtbutler mst ${MST} synctime
pdtbutler mst ${MST} part 0 configure

pdtbutler io ${FAN} reset

pdtbutler io ${EPT} reset
pdtbutler ept ${EPT} 0 enable -a 2

pdtbutler mst ${MST} align apply-delay 2 0 0 --force

pdtbutler mst ${MST} part 0 status
pdtbutler ept ${EPT} 0 status

Master <-> Fanout <-> FMC

MST=PROD_MASTER
FAN=PROD_FANOUT_0
EPT=EPT_1

N.B. EPT1 UID: 0x49162b675ea

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/overlord_tlu_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-4_210818_1746.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/fanout_0_pc059_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-8_210818_1746.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/endpoint_pc053d_fmc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-11_210818_1736.tgz

-- StoyanMiroslavovTrilov - 2021-08-19