Details

Date	03/09/2020
Location	University of Bristol lab
People	Stoyan Trilov

Test description

Test firmware+software for DUNE DAQ v2.8.0 release. Tags used for the software and firmware are listed below.

timing - v5.5.1 (DUNE DAQ v2.8.0)
timinglibs - v1.2.0 (DUNE DAQ v2.8.0)
timing-board-firmware - relval/v6.0.0/b3

The hardware and the corresponding fibre connections used for the tests are listed below.

FIB+AFC <-> FMC (0xd880395da48e)
FIB+Enclustra

timing

Master+Endpoint commands @ 62.5 MHz

The following master/endpoint commands executed successfully with the listed bitfile combinations.

pdtbutler io ${MST} reset ${MST_RST_OPT}
pdtbutler mst ${MST} synctime
pdtbutler mst ${MST} part 0 configure

pdtbutler io ${EPT} reset
pdtbutler ept ${EPT} 0 enable -a 2

pdtbutler mst ${MST} align apply-delay 2 0 0 --force

pdtbutler mst ${MST} part 0 status
pdtbutler ept ${EPT} 0 status

FIB+AFC(fanout) <-> FMC (endpoint)

MST=FAN_FIB_AFC
MST_RST_OPT="--fanout-mode 1"
EPT=EPT_0

N.B. EPT0 UID: 0xd880395da48e
N.B. FIB UID: 0x801f12f5e9ae

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/fanout_fib_afc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-16_210818_1740.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/endpoint_pc053d_fmc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-11_210818_1736.tgz

FIB+AFC(ouroboros) <-> FMC (endpoint)

MST=OURO_FIB_AFC
MST_RST_OPT = ""
EPT=EPT_0

N.B. EPT0 UID: 0xd880395da48e
N.B. FIB UID: 0x801f12f5e9ae

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/ouroboros_fib_afc_relval-v6-0-0-b3_sha-c71891d8_runner-6bb6b053-project-19909-concurrent-2_210818_1737.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/endpoint_pc053d_fmc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-11_210818_1736.tgz

Master commands @ 62.5 MHz

The following master/endpoint commands executed successfully with the listed bitfile combinations.

pdtbutler io ${MST} reset ${MST_RST_OPT}
pdtbutler mst ${MST} synctime
pdtbutler mst ${MST} part 0 configure
pdtbutler mst ${MST} part 0 status

FIB+Enclustra(ouroboros)

MST=OURO_FIB_ENC
MST_RST_OPT=""

N.B. FIB UID: 0x801f12f5ce48, IP : 192.168.200.53

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/ouroboros_fib_ax3_pm3_relval-v6-0-0-b3_sha-c71891d8_runner-6bb6b053-project-19909-concurrent-3_210818_1744.tgz

TEST CONTINUATION BELOW

Details

Date	07/09/2020
Location	University of Bristol lab
People	Stoyan Trilov

Test description

Test firmware+software for DUNE DAQ v2.8.0 release. Tags used for the software and firmware are listed below.

timing - v5.5.1 (DUNE DAQ v2.8.0)
timinglibs - v1.2.0 (DUNE DAQ v2.8.0)
timing-board-firmware - relval/v6.0.0/b3

The hardware and the corresponding fibre connections used for the tests are listed below.

FIB (0x801f12f5ce48) + Enclustra <-> FMC (0x49162b675ea) + Enclustra

timing

Master+Endpoint commands @ 62.5 MHz

The following master/endpoint commands executed successfully with the listed bitfile combinations.

pdtbutler io ${MST} reset ${MST_RST_OPT}
pdtbutler mst ${MST} synctime
pdtbutler mst ${MST} part 0 configure

pdtbutler io ${EPT} reset
pdtbutler ept ${EPT} 0 enable -a 2

pdtbutler mst ${MST} align apply-delay 2 0 0 --force

pdtbutler mst ${MST} part 0 status
pdtbutler ept ${EPT} 0 status

FIB+Enclustra(ouroboros) <-> FMC (endpoint)

MST=OURO_FIB_ENC
MST_RST_OPT = ""
EPT=EPT_1

N.B. FMC UID: 0x49162b675ea
N.B. FIB UID: 0x801f12f5ce48

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/ouroboros_fib_ax3_pm3_relval-v6-0-0-b3_sha-c71891d8_runner-6bb6b053-project-19909-concurrent-3_210818_1744.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b3/latest/endpoint_pc053d_fmc_relval-v6-0-0-b3_sha-c71891d8_runner-slu9p8x4-project-19909-concurrent-11_210818_1736.tgz

-- StoyanMiroslavovTrilov - 2021-09-03