Details

Date	13/09/2021
Location	University of Bristol lab
People	Sudan

Test description

Test firmware+software for DUNE DAQ v2.8.0 release. Tags used for the software and firmware are listed below.

timing - v5.5.1
timinglibs - v1.2.0
timing-board-firmware - relval/v6.0.0/b4

The hardware and the corresponding fibre connections used for the tests are listed below.

 
TLU <-> Fanout
TLU <-> Fanout <-> FMC 

Master+Endpoint commands @ 62.5 MHz

The following master/endpoint commands executed successfully with the listed bitfile combinations.

pdtbutler io ${MST} reset ${MST_RST_OPT}
pdtbutler mst ${MST} synctime
pdtbutler mst ${MST} part 0 configure

pdtbutler io ${EPT} reset
pdtbutler ept ${EPT} 0 enable -a 2

pdtbutler mst ${MST} align apply-delay 2 0 0 --force

pdtbutler mst ${MST} part 0 status
pdtbutler ept ${EPT} 0 status

TLU <-> Fanout

MST=PROD_MASTER
MST_RST_OPT = ""
EPT=PROD_FANOUT_0

N.B. PROD_FANOUT_0 UID: 0xd88039d9248e

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b4/latest/overlord_tlu_relval-v6-0-0-b4_sha-63c384df_runner-slu9p8x4-project-19909-concurrent-12_210908_1721.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b4/latest/fanout_0_pc059_relval-v6-0-0-b4_sha-63c384df_runner-slu9p8x4-project-19909-concurrent-6_210908_1718.tgz

Fanout <-> FMC

MST=TERTIARY
MST_RST_OPT = ""
EPT=EPT_1

N.B. TERTIARY IP=192.168.200.65
N.B. EPT1 UID: 0xd880395da48e

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b4/latest/ouroboros_pc059_relval-v6-0-0-b4_sha-63c384df_runner-6bb6b053-project-19909-concurrent-3_210908_1713.tgz+ https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b4/latest/endpoint_pc053d_fmc_relval-v6-0-0-b4_sha-63c384df_runner-slu9p8x4-project-19909-concurrent-11_210908_1709.tgz

Master+Fanout+Endpoint commands @ 62.5 MHz

The following master/endpoint commands executed successfully with the listed bitfile combinations.

pdtbutler io ${MST} reset
pdtbutler mst ${MST} synctime
pdtbutler mst ${MST} part 0 configure

pdtbutler io ${FAN} reset

pdtbutler io ${EPT} reset
pdtbutler ept ${EPT} 0 enable -a 2

pdtbutler mst ${MST} align apply-delay 2 0 0 --force

pdtbutler mst ${MST} part 0 status
pdtbutler ept ${EPT} 0 status

Master <-> Fanout <-> FMC

MST=PROD_MASTER
FAN=PROD_FANOUT_0
EPT=EPT_1

N.B. EPT1 UID: 0xd880395da48e

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b4/latest/overlord_tlu_relval-v6-0-0-b4_sha-63c384df_runner-slu9p8x4-project-19909-concurrent-12_210908_1721.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b4/latest/fanout_0_pc059_relval-v6-0-0-b4_sha-63c384df_runner-slu9p8x4-project-19909-concurrent-6_210908_1718.tgz + https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b4/latest/endpoint_pc053d_fmc_relval-v6-0-0-b4_sha-63c384df_runner-slu9p8x4-project-19909-concurrent-11_210908_1709.tgz

Loopback with Ouroboros with an FMC @ 62.5 MHz

The following master/endpoint commands executed successfully with the listed bitfile combinations.

pdtbutler io ${MST} reset
pdtbutler mst ${MST} synctime
pdtbutler mst ${MST} part 0 configure

pdtbutler io ${EPT} reset
pdtbutler ept ${EPT} 0 enable -a 2

pdtbutler mst ${MST} align apply-delay 2 0 0 --force

pdtbutler mst ${MST} part 0 status
pdtbutler ept ${EPT} 0 status

N.B MST = EPT = PRIMARY

https://pdts-fw.web.cern.ch/pdts-fw/tags/relval/v6.0.0/b4/latest/ouroboros_pc053d_fmc_relval-v6-0-0-b4_sha-63c384df_runner-slu9p8x4-project-19909-concurrent-1_210908_1717.tgz