TWiki> LinuxSupport Web>LinuxSupportInternals>HowToTestFarmNodes>IbmEserver336Nocona (2005-06-10, unknown) EditAttachPDF
Hardware test

Comments:

  • PXE install failed to turn off DHCP replies (got in a loop reinstalling itself)
  • using libata (no smart, no hdparm, but of course DMA works)

Extra tests:

HWTestTemplate0
MachineType IBM eserver xSeries 336

TestResult PASS
MachinePurpose batch
TestDate 2005/06/10 12:52:49
OSVersion SLC3
HardwareArchitecture x86_64 EM64T)
HardwareIn64BitMode Yes
VGAConsoleOK OK
SerialConsoleBIOS OK
SerialConsoleLinux OK
BootCD not tested
BootFloppy not tested
BootUSB not tested
BootPXE OK
HDDsize not tested
MemoryAmount OK
EthernetPrimary OK
EthernetAll N/A
RebootAfterInstall OK
BootOK OK
HDDdmaOK N/A
SensorsOK N/A
SmartOK N/A
IpmiOK not tested
LspciOutput

root@it-adc-test20:~# lspci -vvx 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c) Subsystem: IBM: Unknown device 02dc Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 1: Memory at ff000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] #09 [4105] 00: 86 80 90 35 46 01 90 00 0c 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 ff 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dc 02 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00

00:00.1 Class ff00: Intel Corporation E7525/E7520 Error Reporting Registers (rev 0c) Subsystem: IBM: Unknown device 02dc Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 86 80 91 35 00 01 00 00 0c 00 00 ff 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dc 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] #10 [0041] 00: 86 80 95 35 47 01 10 00 0c 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 40 30 00 00 20: 00 d0 f0 cf 01 d0 f1 cf 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 03 00

00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=03, subordinate=05, sec-latency=0 BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] #10 [0041] 00: 86 80 97 35 47 01 10 00 0c 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 05 00 40 30 00 20 20: 00 d0 f0 cf 01 d0 f1 cf 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 03 00

00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Memory behind bridge: ce000000-cfffffff BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] #10 [0041] 00: 86 80 99 35 47 01 10 00 0c 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 06 06 00 40 30 00 00 20: 00 ce f0 cf 01 ce f1 cd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 03 00

00:07.0 PCI bridge: Intel Corporation E7520 PCI Express Port C1 (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-0000ffff BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [64] #10 [0041] 00: 86 80 9a 35 47 01 18 40 0c 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 07 07 00 40 f0 00 20 20: 00 ce f0 cd 01 ce f1 cd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 03 00

00:08.0 System peripheral: Intel Corporation E7525/E7520/E7320 Extended Configuration Registers (rev 0c) Subsystem: IBM: Unknown device 02dc Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 86 80 9b 35 00 00 80 00 0c 00 80 08 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dc 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device 02dc Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 2200 [size=32] 00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 22 00 00 00 00 00 00 00 00 00 00 14 10 dc 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device 02dc Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 2600 [size=32] 00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 26 00 00 00 00 00 00 00 00 00 00 14 10 dc 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: IBM: Unknown device 02dc Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [20a0] 00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00 10: 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dc 02 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 00

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: de000000-dfffffff Prefetchable memory behind bridge: d0000000-ddffffff BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 00: 86 80 4e 24 47 01 80 00 c2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 30 30 80 22 20: 00 de f0 df 00 d0 f0 dd 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0b 00

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 86 80 d0 24 4f 01 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: IBM: Unknown device 02dc Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 0480 [size=16] 00: 86 80 d1 24 45 00 a8 02 02 8a 01 01 00 00 00 00 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00 20: 81 04 00 00 00 00 00 00 00 00 00 00 14 10 dc 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) Subsystem: IBM: Unknown device 02dc Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0440 [size=32] 00: 86 80 d3 24 01 04 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 04 00 00 00 00 00 00 00 00 00 00 14 10 dc 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00

01:01.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA]) Subsystem: IBM: Unknown device 02c8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 10 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at dfff0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 59 51 87 01 90 02 00 00 00 03 10 40 00 00 10: 08 00 00 d0 01 30 00 00 00 00 ff df 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 c8 02 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 08 00

03:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=03, secondary=04, subordinate=04, sec-latency=64 BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [44] #10 [0071] Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d8] PCI-X non-bridge device. Command: DPERE+ ERO+ RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 29 03 47 01 10 00 09 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 03 04 04 40 40 30 a0 22 20: 00 d0 f0 cf 01 d0 f1 cf 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 00

03:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=03, secondary=05, subordinate=05, sec-latency=64 BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [44] #10 [0071] Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d8] PCI-X non-bridge device. Command: DPERE+ ERO+ RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 2a 03 47 01 10 00 09 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 03 05 05 40 40 30 a0 22 20: 00 d0 f0 cf 01 d0 f1 cf 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 00

06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) Subsystem: IBM: Unknown device 02c6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Interrupt: pin A routed to IRQ 16 Region 0: Memory at cfff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: 000000421000000c Data: 9200 Capabilities: [d0] #10 [0001] 00: e4 14 59 16 46 01 10 00 11 00 00 02 10 00 00 00 10: 04 00 ff cf 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 07 00 00 00 14 10 c6 02 30: 00 00 00 00 48 00 00 00 00 00 00 00 0b 01 00 00

root@it-adc-test20:~#

Edit | Attach | Watch | Print version | History: r1 | Backlinks | Raw View | WYSIWYG | More topic actions
Topic revision: r1 - 2005-06-10 - unknown
 
    • Cern Search Icon Cern Search
    • TWiki Search Icon TWiki Search
    • Google Search Icon Google Search

    LinuxSupport All webs login

This site is powered by the TWiki collaboration platform Powered by PerlCopyright &© 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
or Ideas, requests, problems regarding TWiki? use Discourse or Send feedback